Appliance Maintenance Plans

Test supply for leaks and bubble test regulator and safety valve [if accessible]

Bake Broil Electronic Ignition And Operation

Air/Fuel Ratio And Mixture, Adjust If Necessary

Safety Valve Resistance And Operation

Door Seal/Gasket For Leaks

Door Hinge Operation

Self-Clean Latch And Mechanism Functions As Designed

Temperatures Of Bake And Broil And Calibrate Through Module Or Thermostat If Applicable.

Electronic Control Operation, Identify All Circuits Working Correctly

All Surface Burners Or Elements Are Cycling From High To Low And Functioning Correctly

All Fan Operations, Convection And Cooling Fans

All Electrical Connections That Are Accessible

Inspect belts, hoses, rubber seals, bellows, and all "wear and tear" parts

Run diagnostics on all functions including fill, spin, and drain

Check washer for leaks

Clean out drain trap if needed

Ensure that the machine is level with the ground

Inspect electrical systems and secure any loose connections

Clean washer with an Affresh Washer Cleaner tablet

Check internal temperatures to verify heat cycles on and off correctly

Inspect tumbler, wear bearings, felts, drum belt, idler pulley, and support rollers for wear and tear

Inspect electrical systems and secure loose connections

Check airflow and ensure the exhaust vent is not bent or obstructed*

Open the dryer and vacuum out all lint and debris

Make sure the dryer is level with the ground

Clean the condenser coils

Check and properly adjust the thermostat and air dampers

Check the automatic defrost cycle

Check door seals for air leaks

Clean the defrost evaporation pan

Check the defrost drain for blockage and leaks

Level the cabinet

Check the ice dispenser (if applicable) for proper operation

Check the water dispenser (if applicable) for proper water flow

Inspect the electrical system

Everything in Gas Range Maintenance Plan

Everything in Refrigerator Maintenance Plan